设为首页加入收藏
群晖首页图片
网站标志
产品详情
 
购物车
购物车中有 0 件商品
总计  ¥0.00元  
商品详情
vk2100 aten 宏正 中控系统 (含中控软件)
编号:vk2100
品牌:ATEN   [查询该品牌全部商品]
单位:个
积分:0
重量:2640 克
规格:
型号:vk2100
ATEN中控系统整合了VK2100(ATEN控制器)、VK6000(ATEN配置软件)及ATEN中控系统App,其是一个基于网络的标准的管理系统,可连接多个房间内的所有硬件设备,并可通过iPad直接轻松的集中控管这些设备。VK2100作为主控制器可连接房间内所有类型的硬件设备
商品售价:¥0.00
订购数量:
订购 加入收藏

浏览 (2658) | 评论 (0) | 评分(0)    
商品介绍
详细参数


VK2100

ATEN中控系统

ATEN中控系统整合了VK2100(ATEN控制器)、VK6000(ATEN配置软件)及ATEN中控系统App,其是一个基于网络的标准的管理系统,可连接多个房间内的所有硬件设备,并可通过iPad直接轻松的集中控管这些设备。VK2100作为主控制器可连接房间内所有类型的硬件设备。连接硬件后,您可以通过VK6000软件使用4个简单的步骤自定义设备配置。当使用以太网连接VK2100后,ATEN中控系统App允许您使用移动设备根据个人喜好来控制不同房间内的多种硬件设备。


VK2100可轻松地部署到现有的安装架构中,与ATEN VanCryst专业影音级产品和完整硬件设备的产品线无缝整合,包括影音设备、照明系统、空调、运动传感器、电源开关等。VK2100作为一个集中的控制平台,可通过iPad使用专业定制的GUI界面直接监控、管理和控制所有涵盖的硬件设备。

VK6000软件具备易于安装的特性,使用直观的GUI界面通过简单的4个步骤即可进行硬件配置和设备操作。通过连接以太网,ATEN中控系统App允许您从VK2100简单易用的用户界面导入和更新用户配置文件。每个用户配置文件提供定制的GUI界面,可让您快速访问目标硬件设备。当您访问任何配置文件时,都需要进行密码验证,以确保系统访问的安全性。

ATEN中控系统完全适用于会议室、会议中心、教室或任何安装各种硬件设备的环境,通过简化管理以提高效率和性能。


Bookmark and Share
包装明细
  • 1x VK2100 ATEN 中控系统
  • 1x 机架安装配件
  • 4x 脚垫
  • 1x 光盘(ATEN Studio)
  • 1x 使用指南
Weee Rohs


  • VK2100(硬件控制器)
  • 支持多种连接接口,包括:
    6x串行端口;
    4x红外线/串行端口;
    4x继电器通道;
    4x输入/输出通道;
    1x以太网端口
  • 4xDC输出提供电源连接
  • 1xUSB端口便于上传配置文件
  • 红外线学习功能可添加红外线设备控制
  • 通过网络GUI界面轻松进行系统配置
  • LED指示灯显示硬件状态和活动信息
  • 可安装于机架上
  • VK6000(配置软件)
  • 使用直观的GUI界面通过4个步骤可简单设定配置文件
  • 专为iPad定制的GUI界面设计和控制操作
  • 内建数据库产生器用于设备驱动程序安装和整体设备管理
  • 内建ATEN资料库,包括10,000+笔设备驱动程序和完整的ATEN VanCryst产品设备驱动程序资料
  • 在上传VK2100配置文件前,可通过测试工具执行验证命令动作
  • 在上传VK2100配置文件前,可通过模拟器模拟和验证定制的GUI界面
  • SSH工具用于监控控制器的输入和输出信号
  • ATEN中控系统App
  • 通过从VK2100导入的多个配置文件可控制多个房间内的设备
  • 通过密码验证来确保用户访问配置文件的安全
  • 可在多个iPad间同步进行系统控制

VK2100 Diagram





接口串口• 4x可编程双向RS-232/422/485端口(4xDB9公头接口,可配置针脚属性);
 – 波特率: 300至115200(默认: 9600);
 – 数据位: 8(默认)或7;
 – 停止位: 1(默认)或2;
 – 校验: 无(默认), 偶或奇;
 – 流控制: RTS/CTS
• 2x双向RS-232端口(2x3孔接线端子接口);
 – 波特率: 300至115200(默认: 9600);
 – 数据位: 8(默认)或7;
 – 停止位: 1(默认)或2;
 – 校验: 无(默认), 偶或奇
红外线/串口• 2x可编程红外线/单向RS-232端口(2 x 4孔接线端子接口);
1x红外线学习接收器(前面板)
• 红外线: TTL电平(0至5V);
 – 载波频率: 10KHz~455KHz;
 – 串口: 单向RS-232(+ -5V)
 – 波特率: 300至115200(默认: 9600);
 – 数据位: 8(默认)或7;
 – 停止位: 1(默认)或2;
 – 校验: 无(默认), 偶或奇
输入/输出• 4x可编程数字输入/输出端口(1x5孔接线端子接口);
数字输出:
250 mA sink from 12 VDC
数字输入:
 – VDC输入模式
输入电压范围: 0 至 24 VDC;
可编程范围: 1 至 24 VDC;
 – 干接点模式
支持+ 12VDC输出
继电器• 4x继电器端口(2x4孔接线端子接口)
• 常开型独立继电器
• 触点容量: 最大24VDC, 2A
VDC• 4x12 VDC输出端口(2x4孔接线端子接口)
• 电源: 12VDC, 2A最大(4端口共享)
以太网• 1xRJ-45母头, 10/100Base-T
• 支持的协议: ICMP, TCP/IP, DHCP, HTTPS, SSH
• DHCP功能。如果在30秒内没有分配IP地址,将使用下面默认的IP设置:
IP :192.168.0.60
子网掩码: 255.255.255.0
• 建立VK2100与VK6000 (ATEN配置软件)、iPad (ATEN中控系统App)连接
开关控制器ID1 x 16段开关
电源1 x 开/关
红外线学习1 x 红外线接收器LED
重置按键1 x 半嵌式按键
USB1 x USB Type A
电源耗电量40 W
输入额定值内部电源: 100-240 VAC, 50-60 Hz
作业环境操作温度0 – 50°C
储存温度–20 – 60°C
湿度0-80% RH, 无凝结
机体属性机壳金属
重量2.64 kg
尺寸
(长x宽x高)
43.72 x 16.32 x 4.40 cm
  • * The specification and pictures are subject to change without notice.
  • * All trademarks and logos ar

VK2100
ATEN Control System - ATEN Controller

The ATEN Control System, incorporating the VK2100 (ATEN Controller), the VK6000 (ATEN Configurator) and the ATEN Control System App is a standard Ethernet-based management system that connects all hardware devices in a room or large facility to provide centralized control of devices directly and effortlessly via an iPad. The VK2100 works as the main controller that provides great connectivity to all sorts of hardware devices commonly seen in a room. After connecting the hardware, the VK6000 software allows customizable device configuration via creation of a simple system project in 4 easy steps. By connecting to the VK2100 via Ethernet, the ATEN Control System App empowers you with the mobility to control different hardware devices in different rooms whenever and however you like.



VK2100
ATEN Control System - ATEN Controller

VK2100 Zoom In VK2100  VK2100  VK2100
The ATEN Control System, incorporating the VK2100 (ATEN Controller), the VK6000 (ATEN Configurator) and the ATEN Control System App is a standard Ethernet-based management system that connects all hardware devices in a room or large facility to provide centralized control of devices directly and effortlessly via an iPad. The VK2100 works as the main controller that provides great connectivity to all sorts of hardware devices commonly seen in a room. After connecting the hardware, the VK6000 software allows customizable device configuration via creation of a simple system project in 4 easy steps. By connecting to the VK2100 via Ethernet, the ATEN Control System App empowers you with the mobility to control different hardware devices in different rooms whenever and however you like.

The VK2100 can easily deploy into an existing installation and integrate seamlessly with ATEN VanCryst pro-A/V products and a complete line of hardware devices, including A/V equipments, lighting systems, air conditioning, motion sensors, power switches and much more. The VK2100 serves as a centralized platform where hardware devices are converged to be monitored, managed and controlled directly via a tailored-made GUI from an iPad.

The VK6000 features a quick setup that facilitates the configuration of hardware control and device operations in 4 easy steps via an intuitive GUI. Through Ethernet connection, the ATEN Control System App enables you to import and update viewer profiles from the VK2100 via point-n-tap user interface. Each viewer profile provides a customized control GUI that grants you quick access to target hardware device. Use of any profile is further protected with password authentication to secure system access.

The ATEN Control System is perfectly applicable in meeting rooms, conference centers, boardrooms, classrooms or any room that requires collaboration of a variety of hardware devices through a streamlined management with optimum efficiency and performance.



VK2100 (Hardware Controller)
Supports various connecting interfaces, including: 
6 x Serial port; 
4 x IR/Serial port; 
4 x Relay channel; 
4 x I/O channel; 
1 x Ethernet port
4 x DC output for power supply connections
1 x USB port for easy profile upload
IR Learning function for adding IR device drivers
Easy system settings via the web GUI
LED indication for hardware status and active messages
SSH tool to monitor the input and output signals of the controller
Rack-mountable
VK6000 (Configurator Software)
Simple profile setup in 4 easy configuration steps via intuitive GUII
Customizable GUI design and control operations for the iPad
Built-in Database Generator for device driver setup and overall device management
Built-in ATEN Library comprising 10,000+ device drivers and complete ATEN VanCryst product drivers
Supports Telnet and PJLink protocols for controlling LAN devices over a network
Test tool to verify commands in action before uploading the profile to the VK2100
Simulator to simulate and review the customized GUI before uploading the profile to the VK2100
ATEN Control System App
Allows administrators to centrally control multiple rooms via different profiles on an single iPad
Controls multiple rooms via multiple profiles imported from the VK2100(s)
Restricted user access to profiles via password authentication
Synchronization of system controls amongst multiple iPads



成都科汇科技有限公司 成立于 2004年,拥有十年KVM行业经验,为您提供完整的行业解决方案。HDMI DVI VGA、视频分配、切换、 延长、及高清信号转换接口。公司现已成为四川地区 Aten 宏正 官方唯一授权代理商  

官方网址:http://www.cdaten.com  
免费电话:400-028-1235 
企业QQ:  4000281235
微信号码: 4000281235
脚注备案信息